Two-hand control device 24VDC 3 n/o 1 n/c - Two-hand control relay DC 24V PNOZ s6.1 #750126

Two-hand control device 24VDC 3 n/o 1 n/c - Two-hand control relay DC 24V PNOZ s6.1 #750126 – Pilz – 750126 – 4046548045895: Two-hand control device 24VDC 3 n/o 1 n/c PNOZ s6.1 750126 Design of the electrical connection screw connection, DIN rail mounting possible, rated control supply voltage Us at DC 24 ... 24V, type of voltage for actuation AC, with removable terminals, design of the switching function of the inputs changer , With feedback circuit, Number of outputs, safety-related, instantaneous, contact-based 3 Number of outputs, safety-related, delayed, contact-based 0 Number of outputs, safety-related, instantaneous, semiconductor 0 Number of outputs, safety-related, delayed, semiconductor 0, Number of Outputs, signaling function, instantaneous, contact-based 1, number of outputs, signaling function, delayed, contact-based 0, number of outputs, signaling function, instantaneous, semiconductor 0, number of outputs, signaling function, delayed, semiconductor 0, suitable for safety functions, type class for safety requirements according to EN 574 type III A, with approval for BG BIA, with approval UL rating, width 22.5mm, height 98mm, depth 120mm. The two-hand control device meets the requirements of EN 574 Type IIIA. It forces the operator to keep their hands out of the hazardous area during the hazardous movement. It is intended for use in two-hand controls. ATTENTION! The two-hand control device must not be used in press controls. It is only suitable for use in the case of a low hazard determined by the risk analysis