LED spotlight 3000K - Downlight/spot/floodlight 2x27W 721719.114

LED spotlight 3000K - Downlight/spot/floodlight 2x27W 721719.114 – RZB – 4051859015901: LED spotlight 3000K 721719.114 Suitable for wall mounting, Suitable for ceiling mounting, Suitable for pedestal/floor mounting, Adjustability not adjustable, Light source LED not replaceable, With light source, Suitable for number of light sources 2, Socket without, Housing material aluminium, Surface powder-coated, Housing color silver , Cover material glass transparent, Type of voltage AC, Nominal voltage 220 ... 240V, Control gear LED control gear, current-controlled, With control gear, Without dimming function, Reflector other, Light distributor reflector, Light distribution asymmetrical, Beam angle unshielded/diffuse, Light emission direct, Degree of protection (IP) IP66, degree of protection (NEMA) other, impact resistance IK04, protection class I, rated ambient temperature according to IEC62722-2-1 -25 ... 42°C, suitable for lamp power 27 ... 27W, max. system power 54W, light color white, color temperature 3000 . .. 3000K, color rendering index CRI 80-89, luminous flux 6050 ... 6050lm, rated luminous flux after h IEC 62722-2-1 6050lm, lamp luminous efficacy 225lm/W, power factor 0.95, width 276mm, height/depth 180mm, length 315mm, type of wiring termination, number of positions 3, conductor cross-section 2.5mm², connectable conductor cross-section 2.5 .. 2.5mm², connection type plug-in terminal, lamp with limited surface temperature ''D mark'', lamp luminous efficacy 113lm/W, glow wire test according to IEC 60695-2-11 650 °C - 30 s, photobiological safety according to EN 62471 RG1, color consistency (McAdam -Ellipse) SDCM3, Made in Germany. Fast device connection without interfering with the housing via screwless connectors with bayonet locking. Asymmetrical reflector made of MIRO-SILVER® with reflection-enhancing coating. Asymmetrical flood light distribution with no rear flare. Housing made of corrosion-resistant die-cast aluminum for outdoor use, bracket made of stainless steel, powder-coated. Light color 830. The extensive range of mounting accessories for mounting on a mast or wall is tailored precisely to the Lightstream® family. Seawater resistant coating optionally available. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Powder-coated stainless steel bracket. Angle of attack adjustable with angle scale. Cover clear safety glass (ESG), ceramic coated. COB LEDs with interchangeable socket. Flat surface reflector made of MIRO-SILVER with 98% total light reflection. Light distribution asymmetrical. Standard with diaphragm valve to prevent condensation. Fast device connection without interfering with the housing via connectors with bayonet lock. With plug-in connection terminal 3x maximum 2.5 mm². Suitable for cable diameters up to d 13 mm.