LED wall/ceiling emergency light 4000K - Emergency luminaire 7,4W IP66 672313.0031

LED wall/ceiling emergency light 4000K - Emergency luminaire 7,4W IP66 672313.0031 – RZB – 4051859268833: LED wall/ceiling emergency light 4000K 672313.0031 Type of installation Wall surface-mounting/ceiling surface-mounting, Escape route lighting function, Suitable for other marking type, Type of marking not applicable, Monitoring device without, Switching type maintained/standby mode, Central feed (central battery), Battery properties other, LED lamps not replaceable, With lamp, Suitable for number of lamps 1, socket without, number of lamp heads 1, housing material aluminium, housing color anthracite, cover material glass opal, type of voltage AC/DC, nominal voltage 220 ... 240V, control gear LED control gear current-controlled, light distributor without , Energy efficiency class of the permanently installed lamp A++, A+, A (LED), protection class (IP) IP66, protection class (NEMA) other, impact resistance IK08, protection class I, luminaire with limited surface temperature ''D mark'', rated ambient temperature according to IEC62722-2 -1 25 ... 25°C, max. system power 7.4W, rated luminous flux according to IEC 62722-2-1 300lm, luminous flux in standby mode 300lm, color temperature 4000 ... 4000K, power factor 0.54, height/depth 91mm, outer diameter 268mm, type of wiring termination, number of poles 3, conductor cross-section 2.5mm², Connection type plug-in connection, elegant appearance without visible screws thanks to bayonet lock with snap lock. LED: Use of smart, cost-effective LED modules for mains voltage with high LED system light output for energy-saving operation. Housing made of corrosion-resistant die-cast aluminium, powder-coated, robust design, stainless steel screws. Fast installation: Tolerance compensation for drill holes. Generous cable management space also allows wall outlets in the center of the luminaire. Electrical connection via plug-in terminals. Fastening points outside the lamp compartment, safe installation through consistent avoidance of errors. Seawater resistant coating optionally available. Fitting and housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Cover Spherical cap made of opal glass with a satin finish. With mounting fixation. Screwless installation of the cover via bayonet catch with snap lock. Fastening outside the sealed area with bore tolerance compensation. Standard with diaphragm valve to prevent condensation. Light source (mains voltage LED module) included. Energy efficiency class A++