Speed monitor 0.1-1200 rpm 24-240V - Speed-/standstill monitoring relay RM35S0MW

Speed monitor 0.1-1200 rpm 24-240V - Speed-/standstill monitoring relay RM35S0MW – Schneider Electric – 3389119405256: Speed monitor 0.1-1200rpm/min24-240V RM35S0MW Design of the electrical connection screw connection, rated control supply voltage Us at AC 50 Hz 24 ... 240V, rated control supply voltage Us at AC 60 Hz 24 ... 240V, rated control supply voltage Us at DC 24 ... 240V , type of voltage for actuation AC/DC, two-channel evaluation of the inputs, speed monitoring function, standstill monitoring function, operating frequency 45 ... 66Hz, with feedback loop, number of outputs, safety-related, instantaneous, contact-based 0, number of outputs, safety-related, delayed, contact-based 0 , number of outputs, safety-related, undelayed, semiconductor 0, number of outputs, safety-related, delayed, semiconductor 0, number of outputs, signaling function, undelayed, with contacts 0, number of outputs, signaling function, delayed, with contacts 1, number of outputs, signaling function , undelayed, semiconductor 0, number of outputs, signaling function, delayed, semiconductor er 0, category according to EN 954-1 1, SIL according to IEC 61508 without, performance level according to EN ISO 13849-1 level a, with approval according to UL, width 35mm, height 90mm, depth 72mm, Zelio Control. This speed monitor monitors a rotating axis for exceeding or falling below a set limit value (0.1-1200 rpm, 0.002-20 Hz). An additional sensor must be connected for detection (3-wire proximity switch PNP or NPN, NAMUR proximity switch, potential-free auxiliary switch, voltage signal 0-30 V). The monitoring type, the limit value and a switching delay can be set. An error memory can also be activated, which keeps the message until a reset. The wide voltage power pack (24-240 VAC/DC) enables universal use. The cable connection is made via screw terminals.