Search results for Operating%20element%20intelligent

Found in manufacturer pages: 1

Lingg & Janke - As a manufacturer of simple and smart residential and building electronics, Lingg&Janke stands for the possibilities that the KNX bus system and the mature and globally standardized products for the intelligent networking of modern house and building system technology offer you. The KNX Smart Metering solution from Lingg&Janke includes cross-sector and cross-manufacturer consistent solutions for integrating a large number of meter variants and, with the open standard 'FTP over KNX', offers economical smart metering solutions for recording, evaluating and saving energy consumption. Lingg&Janke provides you with innovative products and system solutions for more economy, security and adaptability of residential and functional buildings. The technically mature and highly modern FacilityWeb® products from Lingg&Janke enable logging into the systems and the bus participants for reading out energy consumption data, as well as the recording of operating hours, for example from dimmers or the temperature profile with temperature sensors. You have a wide range of applications with KNX for the intelligent recording and evaluation of energy values. In the field of KNX/EIB system devices, the KNX switching, blind and power supply actuators from Lingg & Janke have been tried and tested for many years and countless KNX installations and applications. The essential features of the KNX devices and system components from Lingg&Janke include not only the compact design but also a high switching capacity, for example of capacitive loads. At eibabo, you will find a selection of high-quality products from Lingg&Janke in the Smart Home catalog that exactly meet your requirements. Check it out now!

Found in shop categories: 9

Operating element intelligent - Intelligent controls for controlling blinds are an important part of your smart home installation. You use them to regulate the up and down as well as the up and down of your shading systems. Our product portfolio includes control buttons, operating top units, short-stroke buttons, rotary control modules, timers, time control modules and many other control elements for the smart use of modern building control. As a specialist dealer for intelligent building automation, we offer you everything you need in the eibabo online shop to equip your property with all the technical refinements. In addition to the sale of starter sets and basic products, we also offer you an offer service for products that are not included in the shop. Talk to us and we will implement your project together with you.Catalogue content:In this eibabo® catalogue Domestic switching devices > Intelligent control element you will find items from the following product groups:Item overview:Blind attachmentButtonControl buttonControl elementControl element intelligentControl panelControl surfacesDisplayInstallationInstallation ControlIntelligent control elementIR buttonLight controlMemory functionModular systemOperating top unitRadio buttonRadio receiverRadio systemRadio transmitter moduleRemote controlRocker switchRoom temperature sensorShort-stroke keyShutter timerTouch dimmerVentilation unitWindow contactfrom the following manufacturers:Manufacturer overview catalogue Operating element intelligent:BerkerBusch JaegerElsoGiraGlen DimplexGlenGrotheHeliosJungMertenSomfy

Current monitoring device - If you would like to be in control of your electrical installation, then monitor your cables and wires for correct function and proper current flow. Especially if you want to minimize downtime or failures within production processes, you can counteract any problems early and effectively with a current monitoring relay. Learn more about the types and uses of power monitoring devices here. Use our help when making a purchase decision and choose from numerous quality products at top conditions here in your eibabo® shop.Analysis and EvidenceHigh-quality current monitoring devices are able to store errors that occur for later evaluation, to communicate with other components and, if necessary, to send out alarm signals.Devices of this type are typically installed in the control cabinet and use suitable relays to protect your system against undervoltage or overvoltage or against undercurrent or overcurrent.What types of surveillance devices are there?A monitoring device is a protective relay that is used to monitor various states of an electrical system. It is therefore an electrical switch which is triggered when certain specified parameters are exceeded. The device provides protection by shutting down the system in the event of an abnormal condition. A monitoring device (also called a control relay) typically consists of two main components: a sensing circuit for detecting condition and a trigger element. The detection element is used to determine the monitored parameters. The triggering element serves to trigger the switching process.Individual settings can often be made by the user with these devices. The protection parameters can thus be adapted to the requirements of the respective system. This is done using adjustment wheels and screws or, in the case of digital relays, using buttons and a display. Among other things, the following can be set:Delay ? to avoid false alarms due to sudden power surgesReset (manual or automatic) - used to reset the electrical system after a shiftRemote Reset - to remotely reset the electrical system after a shiftAlarm ? to trigger an alarm in the event of a trip Surveillance devices fall into different categories. These are based on the parameter being monitored. This can be voltage and current, but also filling levels or temperatures. The most common monitoring devices are:Voltage monitors - trip when the voltage in an electrical system exceeds and/or falls below a specified level.Phase monitors ? are used to monitor and protect against polarity reversal, phase failure and phase asymmetry. These constantly check the phase difference between two or more phases.Current monitors - protect equipment in an electrical system from overcurrent or undercurrent. Current monitoring relays trigger when the current exceeds or falls below a predetermined value.Frequency Monitors - Used primarily in Alternating Current (AC) systems where line frequency control is required. These relays are therefore used to protect against frequency anomalies.Temperature monitors ? primarily protect against overheating by constantly monitoring the temperature of the system and the devices that are being protected. Areas of application are predominantly industrial plants where extreme temperatures are a problem.Level monitors - are switches for level control in cisterns, tanks and other storage containers. These devices are used wherever liquid levels need to be monitored. Image: Pilz S1IM #828050 current monitoring relayThe different types of current monitorsCurrent monitors are important devices when it comes to protecting electrical systems. These help prevent damage to equipment and components by shutting off a circuit in the event of a fault. There are different types of electricity monitors. Each has its own advantages and areas of application. Depending on this, please select the right type to ensure proper protection.Primary and secondary power monitorsPrimary devices are mostly part of a circuit breaker and are mainly used in electrical networks with voltages up to 1000 volts. Secondary current monitors are connected to the circuit through a current transformer, which in turn is connected to the power supply. The current transformer reduces the current to a value suitable for the function of the monitoring device. Secondary current monitors are in turn divided into the following subspecies:Electromagnetic DevicesThe devices based on the principle of electromagnetism are the most common. These consist of a core with a copper winding and an armature with attached switch contacts. When the current is off, a spring keeps the armature away from the core. When a voltage is applied, a magnetic field builds up around the core. This attracts the armature and thus switches the connected contacts. The majority of electromagnetic devices are so-called polarized relays. These contain two cores with windings, a permanent magnet and a contact rod. Operation is dependent on the polarity of the input signal. There are electromagnetic relays for alternating and direct current. Their advantages lie in high-quality galvanic isolation, low price, low contact voltage drop and low heat development. No refrigeration is required. Devices of this type are resistant to impulse loads and interference from lightning strikes. The main disadvantages are the limited mechanical and electrical service life and the low operating speed.induction relayThe principle of operation of induction relays is based on the interaction between the current induced in a conductor and a variable magnetic flux. Therefore, with alternating current, these are used as indirect protection relays. The integrated components of the device are arranged in such a way that they are aligned with each other at the set frequency of the current and are not deflected. When the frequency changes, a moving element moves, causing the contacts to close or open. We distinguish between induction devices with a frame, with a pane and with glass.differential relaySuch devices compare the current strength before the consumer and after it. This consumer is usually a power transformer. In the normal state, both values are approximately the same. However, if a short circuit occurs, this balance is disturbed. As a result, the relay closes the contacts and turns off the faulty section of the circuit. Often found in household appliances and lamps, these relays protect people from electric shock.Relays on microcircuits in the integrated electronicsThe devices work with semiconductors such as triacs or thyristors. In the basic principle, such a device compares the incoming signal with the parameters stored in the device for trouble-free operation. If there is a deviation, the relay breaks the circuit.thermal relayThermal relays work with an integrated bimetal. This heats up when an electric current is passed through it. If the current flow deviates from the specified value, the bimetallic strip deforms, causing the contacts to open and close.What should you look for in a current monitoring device?In order for the current monitor to work, its parameters must meet the requirements of the assigned tasks. When selecting a device, pay attention to the following features:Voltage in volts - this is the voltage range in which the device normally operatesCurrent in amperes - each device is rated for a specific currentTripping power in watts - this is the minimum power of the electrical current supplied for normal operationControl power in watts - this is the maximum power of electric current at which the relay will perform its functions correctly TIPWhen making your selection, pay attention to the prevailing operating conditions. Is the device used in critical environments with high humidity, dirt, heat, cold or vibrations? Furthermore, the error detection depends on the accuracy of the measurement of the current strength in amperes. The response time of the device is another important parameter. How long does the device take from the moment of the event to triggering? Under certain circumstances, it can be advantageous to be able to individually set a delay before switching the device on or off for critical loads.As a specialist for smart home technology, we at the eibabo® online shop are your competent partner for all questions relating to intelligent electrical installation. You can get high-quality current monitoring devices from us from well-known manufacturers such as ABB, Dold, Eaton, Eltako, Hager, Pilz, Siemens and many others. Catalogue content:In this eibabo® catalogue Relays > Current monitoring relay you will find items from the following product groups:Item overview:Current measurementCurrent measuring relayDry run protectionFuse clampsLevel measurementLevel monitoringLevel relayLevel switchLoad monitoring relayLoad relayLoad shedding relayModular installation deviceOvercurrent monitorOvercurrent monitoringOvercurrent relayPower guardPower monitoringPower monitoring devicePower monitoring relayPower relayPower window relaySecurity moduleSelectivitySupplementary moduleTest functionThree-phase monitoring deviceTransfer blocksWindow current relayfrom the following manufacturers:Manufacturer overview catalogue Current monitoring device:ABBBenderDoldEatonEberleEltakoETAFinderHagerLützeMetzMurrelektronikPhoenixPilzSchalkSchneider ElectricSiemensWAGO

Alarm control panel - Would you like to control and regulate as many functions of your KNX building automation as possible from a central location? Then take a look at our multifunctional alarm control panels. With these convenient control centers, you always have an overview of all the comfort settings, automatisms and security-related parameters integrated in the building network. Read more about the use and function of these devices below.Image: Busch Jaeger 8136/12-811 KNX Comfort PanelWhat is the KNX protocol?In order to be able to understand the full potential of the alarm control panels, you must first know the KNX standard and its possibilities.There is a growing desire for more convenience and versatility in managing the heating, lighting and security of a home or office building. At the same time, the efficient use of energy is becoming increasingly important. People want a comfortable, environmentally friendly and safe environment to live and work in. And this is where automation can make a valuable contribution. More comfort, greater security and at the same time lower power consumption can only be achieved with intelligent controls for all devices involved. However, this is fundamentally a problem, since when implementing such a system, numerous different sensors and actuators must be controlled using different command devices. Furthermore, the large number of cabling means increased construction work and more effort during installation for planners, as well as higher costs for the user. Simplification would require a system that eliminates the problems of isolated devices. And that is KNX. KNX ensures that all components communicate in a common language. It doesn't matter what kind of device you want to use. The functions can be individually adapted to your needs and include, for example:lighting and blindsSecurity systems, alarm and surveillance systemsEnergy management, heating, ventilation, air conditioningremote controlsAudio and video controlsInterfaces to systems for building maintenance and building management All these functions work with the KNX fieldbus for building automation via a single system. All components interact with each other and create a dynamic building control system. With over 500 KNX-compliant manufacturers, flexibility and choice are huge. KNX is thus the global standard for intelligent building control and ensures full compatibility between manufacturers and related products. The KNX system can be used in almost any building or open space - from a small house to a large shopping center or industrial complex.What are KNX annunciator control panels?A KNX annunciator panel and control panel are usually highly complex, room-spanning control devices, infotainment interfaces and entertainment centers. With these devices, the complete control of a KNX building automation can be implemented at a central point.Which controls are possible with alarm control panels?There are countless equipment details for complex, logical functions. These include, among others:switching and dimmingBlind controls and automatisms for shadingroom temperature controlsCentral functions and scene controlsMultimedia, IP telephony, RSS reader, intercom with image, e-mail, voice memo and graphic memoMonitoring of consumption dataDoor communication with integrated camera and proximity sensorVideo surveillance with alarm and reporting function Everything is now possible. More and more KNX manufacturers are also offering direct interfaces to other home automation systems. These include Bang & Olufsen (B&O), Philips, Siemens Logo, Siemens SPS, CoDeSys, Beckhoff, Omron, Mitsubishi and many other systems. The menu structures of the KNX signaling control panels are partly already implemented or completely freely parameterizable.What should I look out for when buying a KNX annunciator control panel?The requirements for operating your building automation can be quite different. Depending on the type and complexity of your system, a simple device may be sufficient or a complex device may be required.Saving TIPIf it is 'only' about basic functions such as dimming, setting blinds or controlling the heating, we recommend our high-quality KNX push-button sensors. These can also be parameterized individually, look smart and are significantly cheaper to buy.This results in some purchase criteria that you can consider when making your choice:What is my budget?Do I need a complex annunciator control panel at all or can I achieve the same result with alternative devices (e.g. a push button sensor)?Which functions do I want to map?What color and design do I like (glass, stainless steel, plastic)?How should it be operated (keys, touch)?Should the bus coupling be integrated?What other interfaces are required?Where and how is the device installed (surface-mounted, flush-mounted)?Do I only need the control element or also mounting material and frame?Should a possible display be in color or is a monochrome variant sufficient?Is a special degree of protection necessary (e.g. for outdoor installation)?and more What should be considered during installation and integration into the home network?The devices are very complex. You should therefore note that commissioning can also be very time-consuming. Integration into a network via KNX IP router (routing & tunneling protocol) or KNX IP interface (tunneling protocol) is often necessary for full functional use, depending on the required protocol. Therefore, please ensure that you also lay a network cable in addition to a 230V AC power supply and the KNX bus cable. designeibabo® offers versions in high-quality stainless steel or with the finest capacitive glass surfaces as well as individual frame designs. This makes these all-rounders an eye-catcher in every multimedia KNX smart home. In this eibabo® catalog you will find high-quality KNX panels, KNX comfort panels, design frames, KNX touch panels, KNX control panels, KNX mini panels, KNX smart panels, KNX glass color displays, KNX LED displays and many other devices for controlling your Attachment. The leading manufacturers are ABB, Berker, Busch-Jaeger, Eaton, Elsner-Electronics, Hager, Issendorf, Jung, Legrand, MDT, Merten, Peha, Pro-face, Siemens and Warema. Catalogue content:In this eibabo® catalogue Installation bus systems > Signalling and operation panel for bus system you will find items from the following product groups:Item overview:Annunciator panelColor displayComfort PanelControl panelCover frameDisplayDisplay controlDisplay deviceDisplay unitFlush-mounted boxFrameMinitableauMultifunction deviceOperating unitRadio controlRemote controlRoom managerSmartphone operationStatus indicatorTactile screenTouch computerTouch displayTouch panelTouch screenVisualizationVisuControlfrom the following manufacturers:Manufacturer overview catalogue Alarm control panel:ABBBerkerBusch JaegerEatonElsnerfrogblue AGHagerIssendorffJungMDTMertenPro-faceSchneider ElectricSiemens

Fire detector - Your building and the people and objects in it are certainly important to you. Protect your valuables by using fire alarms. Find out here how fire detectors differ and what you should consider when buying one. Fire detectors play an important role in the area of alarm systems. These are an indispensable part of security in private and public buildings. In some cases, the building must be equipped with fire alarms.What are fire alarms?Fire alarms are technical devices or systems that draw your attention to an emergency. This alarm allows you to take action to extinguish a fire and protect people and assets. The devices can be found in the private environment, as well as in commercial units, office buildings, industrial plants and public facilities. Each fire detector detects a hazard in different ways. Irrespective of this, in the event of a fire:acoustic signals are triggered to draw the attention of people in the buildingRemote signals are sent to alert the fire brigade directly or via a central station A complete fire alarm system usually consists not only of the detectors, but also of a fire alarm control panel. This can be set up to trigger various actions automatically. These include, for example:the automatic information of the fire brigadethe activation of extinguishing systems for active firefightingswitching on ventilation systems or extraction systemsopening escape routes In this eibabo® catalogue, the focus is on the detector devices that should be installed at central points in a building to detect hazards.What are the differences between the fire detectors?The various fire detectors are, so to speak, the 'sensory organs' of a fire alarm system. We differentiate between automatic fire detectors and non-automatic fire detectors. Automatic fire detectors detect a fire based on physical properties. Non-automatic fire detectors must be operated manually. The nature of the danger can also be very different. With the automatic fire detectors, you have the choice between simple or technically sophisticated fire gas detectors or smoke gas detectors, heat detectors, smoke detectors, flame detectors, multiple sensor detectors and various special detectors. Manual fire alarms with broken glass windows are non-automatic fire alarms.Fire gas detectors and smoke gas detectorsThe carbon monoxide detector is one of the fire gas detectors. Carbon monoxide is a toxic, colorless, odorless gas produced by combustion. Carbon monoxide detectors or CO fire detectors measure the carbon monoxide content in the air using an electrochemical cell.NoticeThus, a carbon monoxide detector is not only a fire detector. It also warns you if a combustion appliance (such as the heater) in your home has broken down and is emitting dangerous carbon monoxide.However, these devices do not detect smoke or other products of combustion. Other gas detectors immediately detect hazardous fire gases such as hydrogen sulfide, hydrogen fluoride, hydrogen chloride and chlorine gas. Flue gases are sulfur dioxide, nitrogen, carbon dioxide or nitrogen oxide.smoke detectorThere are three different types of smoke detectors, each with a different operating principle. In ionization smoke detectors there is a chamber with two electrically charged plates. In between a small amount of radioactive material. The air between the plates ionizes and current can flow. If smoke enters the chamber, it interrupts the flow of ions and the current flow is reduced. The result is that the alarm is triggered. Ionization smoke detectors work well in flaming fires.The light scattering smoke detectors work according to the Tyndall effect. This means that in a dark chamber there is a light source and a light sensor. Light source and light sensor are separated from each other in such a way that the light does not hit the sensor. Smoke in the chamber causes the light to scatter, which then hits the sensor. The alarm is triggered. These detectors are particularly suitable for smoldering fires.On the other hand, the smoke detector works with the principle of blackout. Light hits a sensor. The sensor measures the amount of light received. If there are fluctuations in the measured values, smoke is assumed and the alarm is triggered. Larger areas can be monitored with this type of detector because the light source and sensor can be positioned further apart.heat detectorHeat detectors or thermal detectors register the rise in temperature caused by a fire. Some heat detectors trigger automatically when a preset ambient temperature is reached. Other models monitor the rate of temperature rise and trigger if the temperature rises faster than the preset value over a period of time. In this case, an alarm is also triggered if the set trigger temperature has not yet been reached. Intelligent heat detectors give an alarm when the ambient temperature around the detector rises above a variable, relative value depending on other parameters.flame detectorFlame detectors are typically used in open areas or outdoors. However, these devices are also used indoors. Their sensors determine the energy emissions of a fire in the ultraviolet and infrared range. Flame detectors do not analyze combustion products such as heat and smoke.Multi-sensor detectorMulti-sensor detectors use a combination of multiple sensor types. These sense smoke, heat, or carbon monoxide to detect signs of a fire. A complex algorithm in the detector circuit uses the measured values to decide when an alarm is to be triggered. When integrated into a fire alarm system, the detector outputs a value based on the combined readings of all integrated sensors. These devices are sensitive to a variety of fires.Image: Hekatron ORS 210 optical smoke detectormanual call pointA manual detector or glass break detector is a device that allows anyone to trigger an alarm. To do this, a fragile element (usually a transparent pane) must be broken. The alarm can be triggered via a button behind it.How can fire alarm systems be structured?The function of fire alarm systems goes far beyond the mere alarming by individual detectors. You can implement these individually depending on your budget and architecture. A complete and reliable threat detection is important.In conventional systems, detectors / sensors / detectors are wired to the main control unit using classic cable connections. The detectors are divided into areas in order to be able to locate the danger point quickly. This makes the work of the fire brigade easier and is relevant for general building management. The current status of each area can be seen on the control center using a lamp or text display. The more differentiated the division of the areas, the more precisely the alarm trigger can be localized.Fire detectors with BUS technology are integrated into a KNX building automation system. The principle for detecting a hazard is similar to that of a conventional system. The connection is established via a BUS data line with the network control. In a KNX environment, each detector is given a fixed address. You can determine exactly which detector triggered the alarm via the control panel.Wireless systems are interesting alternatives to implement conventional or KNX-based fire alarm systems. Signals are transmitted between the sensors and the control center over secure, license-free frequencies. With a wireless system you are very flexible and can make extensions and changes without having to change anything in the fixed installation.Which fire alarm should I buy?You have now become acquainted with numerous fire detectors and alarm systems. Please assess the risk of a fire individually and also the dangers that such an emergency situation means for you and your building. TIP:Rely on a healthy mix of different fire detectors. In order to be able to detect the widest possible spectrum of different fires, we recommend a combination of different fire detectors. You cannot know beforehand whether the worst case scenario is fire and flames, a smoldering fire with heavy smoke development or a defective solid fuel appliance. Not every fire detector detects every type of fire. A multi-sensor detector offers many possible uses. The division into individual devices has the advantage that there is still a certain level of protection even if a single device fails. Catalogue content:In this eibabo® catalogue Alarm installations, emergency call and signalling > Fire detector you will find items from the following product groups:Item overview:Building protectionCombination fire detectorCombined detectorDetector replacementDifferential switchFire detectorFire protectionFire technologyHeat alarmHeat detectionHome smoke detectorHousehold smoke detectorIndoor sirenLimit value techniqueLithium batteryMulti-sensor smoke detectorPower amplifierRadio detectorRadio fire protectionRelay outputRemote inspectionRemote readingSecurity technologySmoke alarm requirementSmoke detectionSystem dual detectorTemperature detectorWire meshfrom the following manufacturers:Manufacturer overview catalogue Fire detector:ABBBusch JaegerEiEltakoESYLUXGezeGiraHagerHekatronIndexaJungNovar EsserRademacherSiemensSomfyWindowMaster

Pressure switch - Would you like to control switching processes in a technical system that are triggered by changes in the pressure of a gaseous or liquid medium? Then you need a pressure switch. Here you can learn a little more about the history, the tasks and the operating principle of pressure switches. Inexpensive and reliable pressure switches for switching valves or pumps are available here in the eibabo® online shop. Choose a model that suits your system from our range.What are pressure switches?Pressure switches are used to automate a pump or compressor. The basic principle of these switching devices is that connected devices:switched on when the pressure falls below a set limitoff when the upper pressure limit is reached Image: Eaton MCSN11-V pressure switchPressure switches have many names. The following terms are very common:Differential pressure switch, pressure limiter, pressure controller, pump relay, water pressure switch, air pressure switch or compressor switchThe devices are used, for example, in liquid tanks or gas tanks in which the filling level or the internal pressure of the medium contained therein is to be monitored. This ensures that certain values are not exceeded or fallen below. Alternatively, when a critical value is reached, switching processes are triggered in order to restore the desired or programmed normal state. A distinction is made between mechanical and electronic pressure switches, which offer individual advantages depending on the desired area of application.The history of the pressure switchIn the past, pumps and compressors were switched on and off mechanically and required constant human intervention. In the early 1930s, August Frede Maschinenfabrik (today: Condor-Werke) developed a simple and functional device that was equipped with a membrane and worked according to a spring principle. This first pressure switch should automate the switching on and off of pumps or compressors. In 1935, the company received the world's first patent for a diaphragm pressure controller for the automatic control of pumps. To this day, Condor-Werke is one of the global market leaders in the development and production of pressure switches.What are the advantages of a pressure switch?A pressure switch allows full automation of the start-up and shut-down process, eliminating the need for human involvement in managing the pump or compressor. An automatic shutdown when the upper pressure limit is reached guarantees the safety of the respective system. If pumps or compressors only work within a certain pressure range due to intelligent switching processes, energy costs can be significantly reduced and resources saved. TIPBe sure to note the installation location and, accordingly, the moisture protection of the pressure switch. In addition, pressure switches are very reliable and durable.The mechanical pressure switchDepending on the design, pressure switches can work mechanically or electronically. Mechanical type devices are more common due to their reliability, durability and simplicity. The mechanical pressure switch can be installed directly on site with minimal effort.NoticeHigh-quality pushbutton switches have non-stick silver-plated contacts, a high-strength diaphragm and fine-tuning capabilities. Especially with cheap goods from the Far East, the lack of these properties can lead to failures and unreliable switching operations. Here in the eibabo® online shop you only get reliable quality goods from well-known brands.The functional principle of a mechanical pressure switch is essentially based on the combination of a membrane with a block of adjustable springs. The pressure of the working medium is transmitted through the diaphragm to the working pressure setting springs by means of nuts or screws. A differential pressure setting spring measures the value of this compression. If the compression of the working pressure setting springs exceeds a certain value due to the pressure of the diaphragm, the differential pressure setting spring opens the contacts in the contact block and the pump or compressor is switched off. When the pressure drops, the tension in the springs relaxes again and the compression decreases. The mains contacts then close again and the connected device is switched on again. Depending on the version of the pressure switch, there may be additional outlets for connecting a pressure gauge and safety valves.The electronic pressure switchAn electronic pressure switch is actually a complete pump controller. As a rule, these devices include elements for soft starting, protection against dry running, as well as ways of setting the upper and lower thresholds of the operating mode of the pump or compressor. The advantages compared to a mechanical pressure switch are the smaller dimensions and the setting principle. Sensitivity adjustment screws are located on the electronic pressure switch body.How do I protect myself from my system running dry?The cause of failures in the operation of pumps or compressors is often the lack of the required working medium in the system. This problem is annoying and affects the reliability of all components. Idling leads to overheating or damage to parts and the associated failure of the entire system. To avoid this, when choosing a pressure switch, please consider the characteristics and allowable ratings for the operation of your pump or compressor. You avoid the danger of idling as follows:Buy a device with dry-running protection. These devices are a bit more expensive, but respond very effectively to pressure drops.Invest in the installation of a controller that not only monitors the pressure. This would, for example, also switch on the pump if the actual values fall below the set target values. How do I choose a pressure switch?When choosing a pressure switch, it is necessary to determine the type of pressure switch, the required functionality and the operating pressure:Should the switch monitor the pressure of liquids or gases?Does the switch have to be able to withstand chemical compounds?In which key figures is the working pressure range?How is the power supply designed for the switch (voltage, number of phases, current)?What sizes are required for the flange connections?What additional components and options are desired? Examples of this would be: start button, thermal relay to protect the electric motor, dry running protection relay for pumps, relief valve to make starting compressors easier and so on. When installing a high-quality pump, please remember that the pressure switch should also be of the same quality. This is the only way to ensure reliable operation. by the wayThe manufacturers of high-quality devices carry out long-term tests with the pressure switches in the laboratory in order to guarantee more than half a million switching operations. Use our detailed search to select your pressure switch. There you can precisely set the parameters of the switch you want and filter accordingly. Catalogue content:In this eibabo® catalogue Low-voltage industrial components > Pressure switch you will find items from the following product groups:Item overview:Compressor switchCylinder switchDifferential pressure switchPressostatPressure limiterPressure monitoring devicePressure regulatorPressure sensorPressure sensorsPressure switchPressure transducerPressure transmitterTwo-position controllerVacuum monitorVacuum switchfrom the following manufacturers:Manufacturer overview catalogue Pressure switch:Alre-itBaumerBourdon-HaenniCondorDoepkeEatonElsterEndress + HauserHeliosHoneywell FemaIfm ElectronicIpf ElectronicJumoMaicoNE-MARockwellSchneider ElectricSickSMC Deutschland

Socket board - How many consumers can be connected to a socket strip? How do you integrate the power strips into office furniture? You can find out in this eibabo® catalogue, and find the right product for you from the large selection of socket strips. Socket strips are also referred to as multiple sockets or power strips. These provide a connection to the power grid for several electrical consumers with a standardized plug connection. In contrast, an extension cord usually only has a single connection.Which criteria are important for the purchase of a power strip?A power strip is a relatively simple tool for expanding the electrical installation. Nevertheless, it is advisable to pay attention to a few basic things. These are:Sufficient number of slotsStable material quality of cable, plug and socketsThe presence of surge protectionSpecification of a test mark such as the GS seal or the VDE sealAn adequate IP rating for the intended useAdditional equipment (switches, child protection and so on) How many devices can be connected to a power strip?In principle, the number plays a subordinate role. It depends on the sum of the power. Please note that under no circumstances should too many powerful consumers be connected to a socket strip. Remember that a device doesn't have to be big to require large amounts of power. You should therefore not connect high-power devices such as refrigerators, washing machines, dryers, space heaters, air conditioners or ovens to a power strip. Small consumers such as lamps, computers, entertainment devices or printers do not pose a problem. TIP:The connected loads should not exceed a combined output of around 2300W at 10A or 3600W at 16A measured at 230V mains voltage. Please make sure that you do not connect multiple socket strips in a row. Otherwise the resistance (impedance) could become too large due to the concatenation.Can socket strips also be sources of danger?As long as you are using a power strip properly, there is nothing to worry about. Pay attention to the performance of the connected devices and to a safe laying of the cable. Never lay a line under a carpet that many people walk over every day. Over time, this can cause the wires in the line to break, heat up, and cause sparks. Check the cable and the power plug of the strip regularly. If you find any damage, replace the power strip.Image: Bachmann 333.400 19 inch power stripWhat types and equipment are possible with socket strips?Combinations of different equipment features are also often available. At eibabo® you can get socket strips with switches and overvoltage protection or master/slave socket strips with switches, among other things. Further explanations would be, for example:Switch, toggle switch or foot switchtimersOvervoltage protectionchild lockMaster/slave power strips Or the following statements:19 inch power stripsALU socket stripsOutdoor sockets and garden sockets or combination plugsDesk boxes and table socketsEnergy cube (SCHUKO or up to 400V CEE)Multiple crafting barsSocket strips for IEC cold devicessocket towerssurge outlets What are the advantages of power strips with surge protection?Power strips with overvoltage protection protect connected devices from damage because voltage peaks are reduced. An upstream coarse protection in the meter cabinet and medium protection in the electrical distribution is also advisable. TIP:We recommend the use of surge protection if you supply valuable technology with the additional sockets. A surge protector has another protective element that absorbs additional current. These can be current fluctuations or voltage peaks, which could otherwise damage or destroy your connected electronics.What are master/slave power strips?Power can be saved with master/slave socket strips. An integrated electronic circuit detects whether power is flowing through the master socket. If power is present at the master socket, the slave sockets are activated. If no more current flows through the master socket, the slave sockets switch off. The typical application is a computer and its connected peripheral devices. If the computer is switched on via the master socket, monitors, scanners and printers also start. Turning off the computer also disables all other devices, avoiding going into sleep mode.What do I use 19 inch power strips for?19 inches is a standard installation size for server cabinets. If you want to install many devices in your server cabinet, you need an adequate power supply. With a 19-inch socket strip, up to 10 devices can be connected. The socket strip is adapted to the profile rail of the 19-inch server cabinet and can be mounted directly.We recommendIn order to set up additional protection, we also recommend an uninterruptible power supply (UPS) in addition to integrated overvoltage protection.You can also get high-quality UPS systems in the eibabo® shop. Use our intelligent search.What options do I have for permanent installation of power strips?You need electricity at practically every workplace. With socket strips for mounting on, under or in a desk, you can create connection points for monitors, printers, beamers and telephones. So you don't have to crawl under the desk every time you want to connect something. In addition, the connections don't get dusty as quickly because they are easy to access for cleaning or are integrated into a housing. In addition to the desired number of power connections, other interfaces (USB, HDMI and others) are often available. In addition to mounting on or under the tabletop, it is sometimes possible to retrofit it by drilling or cutting out the tabletop.With socket units you remain flexible. These are housings that you can individually equip with suitable inserts. This is how you put together the perfect supply bar yourself. Catalogue content:In this eibabo® catalogue Domestic switching devices > Multiple socket you will find items from the following product groups:Item overview:Artisan tinComputer power stripConnection accessoriesDouble socketEnergy measurementFranceGarden socketGround spike socketMains interference filterMonitoringNetwork cabinetsNetwork connectivityNetwork interfaceNine-way socketOvervoltage protectionPlug-in modulePower distributionPower stripsPower supplyRedundancy moduleRetrofitSchuko socketSocket caseSocket coverSurge protection deviceSurge protection moduleTable socketTable socketsfrom the following manufacturers:Manufacturer overview catalogue Socket board:BachmannBrennenstuhlDehnE+P ElektrikEatonEaton USVEgloEnocHamaHartingJungKindermannLegrand BticinoOBOPentairPollmannRittalSchneider Elec.(APC)Schneider ElectricSchäfer IT-SystemsTehalitVertiv

Display - Imagine going to bed not sure if the front door is locked. Or you leave the house and want to make sure that the lights are switched off everywhere. What do you do? Well, you set out and check doors, windows, and light switches. Or you look at the KNX display. KNX displays are used to visualize, display and signal all connected functions of your individual, networked house.What is the task of KNX displays?In order to understand the benefits of a KNX display, you should basically familiarize yourself with the KNX building automation. The use of KNX systems allows you to automate buildings at the level of the highest user requirements. It offers you more comfort and security, while energy consumption can be significantly reduced in the long term.NoticeKNX is the most widely used standard for electronic automation systems. This makes it possible to control and monitor all the components involved from home or remotely.KNX stands for Konnex-Bus and is the first globally recognized standard for the intelligent connection of building installations with automation solutions. Countless KNX products are used in thousands of buildings worldwide. This is a clearly defined system platform to which the components of all certified manufacturers are compatible. With the ETS (Engineering Tool Software), a uniform software for project planning, implementation and commissioning was created.The term 'smart home' has become established for the automation of private areas of life. And as part of a smart home installation, you automatically create the ideal conditions for working, sleeping, partying or cooking in your own home. They regulate the light intensity, raise or lower the blinds, adjust the temperature or switch on multimedia devices. This is done remotely using a smartphone app or tablet computer or directly by operating buttons or KNX displays. KNX operating elements such as displays thus represent the interface between the automation technology and you as the user.What are the advantages of building automation and its visualization using displays?Compared to a conventional electrical installation, a KNX installation seems expensive at first glance. But as an experienced builder, you look at the costs over the entire life cycle of the product. In the planning phase, you compare the acquisition costs with the plus in comfort and functionality as well as the associated savings potential. Networked structures offer significantly better efficiency than individual systems. In residential and commercial buildings, these reduce energy consumption. Especially in times of rising costs for gas, water, oil and electricity, the reduction in operating costs quickly has a positive effect on your entire investment. At the same time, such systems guarantee significantly more security. The main advantages are:Control and monitoring of functions for the entire installationIntegration of media technology and internetSaving expensive resourcesincrease in securityincrease in value of the buildingsustainability Modern KNX displays are your user-friendly interfaces for this. With direct, intuitive user guidance, you can visualize all processes and messages on the display and access your configurations from a central location.Image: Busch Jaeger 83221AP-625 Busch-free at home panelWhich functions are assumed by KNX displays?KNX displays are a useful addition to KNX building automation, for example on the front door or in the bedroom. But access to the central house control can also be useful in the kitchen, in the basement or in outbuildings. With their help, you quickly get an overview of the most important system statuses, for example whether all doors and windows are closed. It can also be used to carry out switching actions for central commands. These include:Central light on / offHeating standbyExterior lighting centrally on / offpanic switchEmergency call or alarm system on / offSet point adjustment for room temperaturesadditional audible alarmsand much more The lighting or its brightness can usually be parameterized so that the brightness is only active in the event of operation or an alarm. You create the menu structure individually and clearly. This makes it easier for you to navigate to the desired functions. In addition, standard values can be displayed, such as the outside temperature, date and time or any other text telegrams (14 bytes). KNX displays often also have useful additions. Time switch programs enable scenarios to be programmed in the future and at regular and irregular intervals. You can send these date and time settings to the KNX bus. TIP:When buying, pay attention to the very different features of the displays. Study the service descriptions and choose a model with the right range of functions. Depending on the model, the devices also differ in the following parameters:simpler devices have a classic display, others are complex panels with colored touch displayssome displays require an additional power supply, others are supplied with energy via the bus linesome models have an enclosed bus connection, in others the bus coupler is already integratedDevices are available for surface or flush mounting Can I use a KNX display as a door station?You can use some KNX displays as indoor stations for your door intercom system. Using a corresponding function module, a hands-free function and the display of the video image of the front-door station is possible. Pictures of the visitor can be taken and saved during the conversation. Even when you are away, you can automatically take and save pictures of a visitor. Other functions can be:Different ring tones can be set for door calls and storey callsHands-free volume and ringtone volume freely adjustableQuick access to the door open, mute and light buttonsan SD card slot enables the image memory to be expanded The KNX displays are available in countless design variants and can be perfectly integrated into all available switch ranges. In this eibabo® catalog you will find KNX displays, radio bus displays or displays for alternative automation systems. This catalog also includes wireless weather data displays, KNX energy consumption displays and KNX control panels. Leading manufacturers of KNX TFT displays, KNX info displays, KNX LCD displays and KNX LED displays include ABB, Berker, Busch-Jaeger, Eaton, Eltako, Hager, Jung, MDT and Merten. Catalogue content:In this eibabo® catalogue Installation bus systems > Display for bus system you will find items from the following product groups:Item overview:Access controlBuilding controlControl centerControl panelDisplayDoor bellDoor communicationDoor intercomHome controlIntercomNetworkingTouch displayfrom the following manufacturers:Manufacturer overview catalogue Display:ABBBerkerBusch JaegerMDT

The following 3596 products have been found matching your search "Operating%20element%20intelligent":

Item/s (3596)

Categories | Others (10)

Found in manufacturer pages: 1

Found in shop categories: 9