SINAMICS PM230 380-480V, 30.00kW - Frequency converter 380...480V 30kW 6SL3223-0DE33-0AA0

SINAMICS PM230 380-480V, 30.00kW - Frequency converter 380...480V 30kW 6SL3223-0DE33-0AA0 – Siemens – 4019169458245: SINAMICS PM230 380-480 V, 30.00 kW 6SL3223-0DE33-0AA0 Mains voltage 380... 480V, mains frequency 50/60 Hz, number of input phases 3, number of output phases 3, max. output frequency 550Hz, rated output current I2N 60A, max. power output at square . Load at rated output voltage 30kW, Max. power output with linear load at rated output voltage 22kW, Relative symmetrical mains frequency tolerance 5%, Relative symmetrical mains voltage tolerance -10%, Can be used in the industrial sector, Type of converter U-converter, Degree of protection (IP) IP55, height 640mm, Width 320mm, depth 329mm, SINAMICS G120P Power Module PM230 with integrated Class A filter Degree of protection IP55/UL Type 12 3AC380-480V+10/-10% 47-63Hz Power low overload: 30kW at 110% 60S, 100% 240S ambient temperature 0 to +40°C (LO) 640x 320x 329 (HxWxD), FSD without Control Unit and operator panel released for CU230P-2 from firmware version V4.3.2 SINAMICS Power Module PM230 Power Module degree of protection IP55The specialist for building technology for the SINAMICS frequency converter G120P. In combination with the appropriate CU230P-2 control unit and an operator panel IOP/IOP-2 (Intelligent Operator Panel) or Basic Operator Panel (BOP-2) or optionally a blanking cover, the SINAMICS power section results in the functional SINAMICS G120P frequency converter. The high degree of protection enables use in harsh environments, for example operation at ambient temperatures of up to 60 degrees. The PM230 with protection class IP55 generates only low mains feedback without additional measures as well as apparent power losses and ensures an automatic acknowledgment of faults after a mains failure. In addition to the energetic advantages, the environment is also protected. The PM230 power section with IP55 protection is available from 0.37 kW to 90 kW for wall mounting outside the control cabinet. Frame sizes FSA to FSF of the PM230 Power Module with degree of protection IP 55 are available with an integrated class A line filter for category C2 installations and with an integrated class B line filter for category C1 in accordance with EN 61800-3. The following accessories are included in the delivery as standard: Shield plates and shield connection kits for the EMC-compliant connection of power and control cables, as well as connector plugs for the line and motor feeder for sizes FSA to FSC. SINAMICS - the integrated drive family for every area of application