STX mounting rail distributor modular m.6xLC-Q OM2 - LC Patch panel fibre optic for 6 ports 10002...

STX mounting rail distributor modular m.6xLC-Q OM2 - LC Patch panel fibre optic for 6 ports 10002... – Telegärtner – 4018359531935: STX DIN rail distributor modular m.6xLC-Q OM2 100022875 Suitable for number of couplings/adapters 6, Suitable for number of module inserts 6, With number of couplings/adapters 6, With housing, fiber type multimode 50/125 and 62.5/125, fiber class OM1, connector type outside LC, color beige, RAL number 7016, for connecting breakout and mini-breakout cables and ready-to-connect fiber optic routes. An M20 cable gland for cable diameters 5 – 9 mm is included in the scope of delivery. All too often, distributors are installed that are oversized for current requirements - either to accommodate future expansions or because there is no more suitable solution. The new modular distributor from Telegärtner can be adapted exactly to the actual requirements and later expanded without tools during ongoing operation as required, which saves a lot of money. The connector couplings are mounted at a 45 degree angle, allowing patch cables to be easily plugged in and unplugged while requiring minimal space. Despite their compact dimensions of 35 x 215 x 155 mm (width 2 division units (TE)), the stackable modules offer generous excess length accommodation for fibers and cores. Cable entry is possible from four directions (top, bottom, top back, bottom back) and can be determined on site. The modules can be mounted on TH35 mounting rails according to DIN 60715 or on the wall. Notes: Note: For ready-to-connect fiber optic routes created with the TICNET configurator, a uniform whip length of 0.7 m must be selected for optimal cable routing. Number of couplings: 6 Description: STX modular mounting rail distributor with 6x LC-Q OM2 beige Housing: STX modular mounting rail distributor Housing color: anthracite gray (similar to RAL 7016) Couplings: LC-Q Dimensions in mm: 35 x 215 x 155 Pigtails: see article number key / see article description Protection class: IP30 Splice cassettes: Only variants with pigtails (PT): 1 piece, Telekom type, with 2x splice holders for 12x crimp/shrink splice protection each. Only versions with pigtails (PT): 1 pcs, type Telekom, with 2x splice holders for 2x 12x crimp/splice protectors Description: STX modular mounting rail distributor with 6x LC-Q OM2 beige Scope of delivery: basic housing with pre-assembled couplings, 4 knock-out openings for assembling the cable glands, 2 connecting bars, 1 M20x1.5 cable gland, assembly instructions, packaging, variants with pre-assembled pigtail sets also contain ready-to-splice, color-coded pigtail sets in accordance with VDE 0888, 2 cable ties, and a splice cassette with splice holders