Analog input terminal 4AI NI1000/RTD - Fieldbus analogue module 4 In / 0 Out 750-460/000-005

Analog input terminal 4AI NI1000/RTD - Fieldbus analogue module 4 In / 0 Out 750-460/000-005 – WAGO – 4045454848965: Analog input terminal 4AI NI1000/RTD 750-460/000-005 supply voltage at DC 24... 24V, voltage type of the supply voltage DC, input, resistance, resolution of the analog inputs 12 bit, number of analog inputs 4, number of analog outputs 0, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW Interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, system component, degree of protection (IP) IP20, design of the electrical connection spring-loaded connection , fieldbus connection via separate bus coupler possible, DIN rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, width 12mm, height 64mm, depth 100mm, the input c lemme allows the direct connection of Ni resistance sensors. The connection can be made using 2-wire technology. The bus terminal takes over the linearization over the entire temperature range. A short circuit or an interruption in the sensor line as well as exceeding the range is indicated by a red error LED.