Overvoltage protection - Surge protection for signal systems VSSC4CLFG 12Vdc 0.5A

Weidmüller - VSSC4CLFG 12Vdc 0.5A - Overvoltage protection - Surge protection for signal systems VSSC4CLFG 12Vdc 0.5A
Photo source: fig. possibly similar
VSSC4CLFG 12Vdc 0.5A 1063760000 4032248829217 EAN/GTIN DE 73937473 WEEE

49,090.56₹ excl. VAT
(For 10 Piece) plus shipping

16-17 days* (IND)

x 10 Piece
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Rated voltage DC 12V, Highest continuous voltage DC 15 V, Nominal discharge current (8/20) 2.5... more
Overvoltage protection - Surge protection for signal systems VSSC4CLFG 12Vdc 0.5A – Weidmüller – 1063760000 – 4032248829217: Rated voltage DC 12V, Highest continuous voltage DC 15 V, Nominal discharge current (8/20) 2.5 kA, Nominal load current 0.5 A, Protection level wire / core 1434 BC, Frequency 750 MHz, Mounting DIN rail TH35, Connection 1 Clamp, SPD no, With telecommunication contact no, Signaling on the device without, Explosion-tested version yes, Overall width 6.2 mm, IP protection) IP20
... more
Rated voltage DC 12V
Highest continuous voltage DC 15 V
Nominal discharge current (8/20) 2.5 kA
Nominal load current 500 A
Protection level wire / core 1434 BC
Frequency 750 MHz
Mounting DIN rail TH35
Connection 1 Clamp
SPD no
With telecommunication contact no
Signaling on the device without
Explosion-tested version yes
Overall width 6.2 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection - Surge protection for signal systems VSSC4CLFG 12Vdc 0.5A"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.