Flush-mounted ceiling presence detector, 360 degrees PD-C 360i/8

Flush-mounted ceiling presence detector, 360 degrees PD-C 360i/8 – ESYLUX – EP10425059 – 4015120425059: Ceiling-mounted presence detector, 360 degrees PD-C 360i/8 Presence detector version, sensor type passive infrared, forced switch-on, forced switch-off, scanning angle 360°, optimum installation height 3m, stairwell monitoring, bypass switch, max. range to one side 4m, max. presence area 12.58m² , Max. frontal range 3m, detection field diameter on the floor 8m, remote controllable, adjustable response sensitivity, adjustable response brightness, with signal unit, teach function for response brightness, suitable for ceiling mounting, flush-mounted installation type, connection type plug-in terminal, material plastic, material quality thermoplastic, halogen-free, surface untreated , Surface finish matt, color white, RAL number (similar) 9010, transparent, protection class (IP) IP20, type of voltage AC, frequency 50 ... 60Hz, nominal voltage 230V, min. switch-on time 60s, max. switch-on time 30min, switch-off delay 300s , switch-on delay 30s, horizontal detection angle 180 ... 360°, sensor swivel range, horizontal 0°, sensor swivel range, vertical 0°, response brightness 5 ... 2000lx, max. switching capacity 2300W, suitable for C loads, temperature -25 ... 50°C, number of switching zones 1, max. inrush current 800A, control current 0mA, extension input, height 62mm, diameter 108mm, installation depth 24mm, installation diameter 60mm, min. depth of the device box 24mm, presence detector with 360° detection area for ceiling mounting. Range of up to 8 m in diameter at a recommended mounting height of 3 m (maximum mounting height 5 m) for use in small rooms and passageways with daylight. 16 A high-performance relay (tungsten pre-contact), especially suitable for switching capacitive loads such as e.g. E.g. electronic ballasts, parallel-compensated fluorescent lamps, compact fluorescent lamps, energy-saving lamps. Firmly stored factory program for immediate operational readiness. Automatic light control depending on presence and daylight. Easy programming by remote control with blue mode technology or by setting elements. Integrated switch for setting by remote control or setting dial - avoidance of operating errors and as protection against sabotage. Sources of interference are suppressed by reducing the sensitivity using a DIP switch. Additional button input with switching function room = ON + OFF/corridor = ON. Detector can be used fully or semi-automatically. Standard version as a flush-mounted device. Surface or ceiling installation with accessories. Cover panel and design ring can be easily changed/painted (available in silver as an accessory). Extension of the detection area by connecting slave devices. Targeted blanking of areas using the enclosed lens mask.