LED universal dimmer insert standard - Dimmer flush mounted 245000

LED universal dimmer insert standard - Dimmer flush mounted 245000 – Gira – 4010337031406: LED universal dimmer insert standard 245000 Composition of basic element, operation type rotary/push button, dimming leading edge, dimming trailing edge, universal load type and LED retrofit, light value memory, flush-mounting type, fastening type claw/screw fastening, other material, other material quality, other surface, suitable for protection class (IP) IP20, rated voltage 230... 230V, frequency 50... 60Hz, connection type screw terminal, System 3000 universal LED rotary dimming insert standard features: switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Automatic setting of the dimming principle suitable for the load (leading edge or trailing edge). Lamp-saving switching on. Switch-on brightness can be saved permanently. Switching on with the last set brightness or saved switch-on brightness. Minimum brightness adjustable. Electronic short circuit protection. Electronic over-temperature protection. Operation with and without neutral conductor connection. Notes: In principle, the dimmer can be operated without connecting the neutral conductor, but some LED and CFLi light sources require the neutral conductor connection to avoid flickering. When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50 W. Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer. If the ambient temperature is higher than 25 C, the connected load must be reduced.