Sensotec LED without remote control pure white - Movement sensor 6m 237803

Sensotec LED without remote control pure white - Movement sensor 6m 237803 – Gira – 4010337014539: Sensotec LED o.FB pure white 237803 Motion detector version, flush-mounted installation, installation height 1.1m, max. range to one side 4m, max Degree of protection (IP) IP20, min. duty cycle 1s, max. duty cycle 90min, horizontal detection angle 0 ... 50°, color white, RAL number (similar) 9010, Sensotec LED System 55, without remote control pure white glossy Detection uses the Doppler effect , similar to the speed measurement in road traffic. Motion can also be detected by non-shielding materials. So e.g. B. toilet facilities can be covered with a single Sensotec. Features: Non-contact switching prevents contamination. This rules out contamination from viruses and bacteria by the user. Detection in the near and far range depends on the reflecting surface, the speed and the type of object (person, animal, object, etc.). Metal frames affect the detection area. Extension of the detection area through extensions. Extension operation with rocker switch. Requires an IR remote control for commissioning and setting various functions. Individual brightness value and follow-up time possible (teach function). Remote detection sensitivity is adjustable. Installation in a deep device box. Meets the requirements of the VDI VDE 6008 Sheet 3 guideline. The Sensotec LED is an active motion detector. It detects movements in the detection area regardless of the temperature and switches on the LED orientation light depending on the ambient brightness. Movement in the close range switches z. B. the room lighting. Adjustable switch-on brightness of the LED orientation light. Notes : An IR remote control is required for commissioning and setting various functions.