Uni-LED dimming insert 2x S3000 - Dimmer flush mounted 540200

Uni-LED dimming insert 2x S3000 - Dimmer flush mounted 540200 – Gira – 4010337063827: Uni-LED dimming insert, 2-fold S3000 540200 Composition of basic element, operation type rotary/push button, dimming leading edge, dimming trailing edge, series dimmer, universal load type and LED retrofit, extension input, light value memory, flush-mounting type, fastening type claw/screw fastening, other material, other material quality, Other surface, other color, suitable for protection class (IP) IP20, rated voltage 230 ... 230V, frequency 50 ... 60Hz, connection type screw terminal, System 3000 universal LED dimming insert comfort, 2-fold Features: Two independent outputs for two lighting groups. Switching and dimming incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Connection of extensions possible. With a System 3000 3-wire extension insert in conjunction with a System 3000 operating top unit, 2-gang, both outputs can be operated separately. Automatic or manual setting of the dimming principle suitable for the load (leading edge or trailing edge). Display of the set operating mode via LED. Lamp-saving switching on. Switch-on brightness can be saved permanently. Switching on with the last set brightness or saved switch-on brightness. Minimum brightness adjustable. Electronic short circuit protection. Electronic over-temperature protection. Operation with and without neutral conductor connection. Notes: In principle, the dimmer can be operated without connecting the neutral conductor, but some LED and CFLi light sources require the neutral conductor connection to avoid flickering. When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50 W. Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer. If the ambient temperature is higher than 25 C, the connected load must be reduced.