Electricity meter data gateway RS485 bus - Radio interface for bus system FSDG14

FSDG14 30014066 4010312316146 EAN/GTIN DE 30298319 WEEE

Our best price
4,078.88₹ excl. VAT
5,536.36₹ (-26.33% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Electricity meter data gateway RS485 bus FSDG14 radio bus system, other bus systems, radio... more
Electricity meter data gateway RS485 bus - Radio interface for bus system FSDG14 – Eltako – 30014066 – 4010312316146: Electricity meter data gateway RS485 bus FSDG14 radio bus system, other bus systems, radio bidirectional, radio interface design manufacturer-specific, type of installation REG, width in modular units 1, operating voltage 12V, protocol other, IR interface, protection class (IP) IP20, RS485 bus radio -Electricity meter data gateway for meters with IR interface IEC 62056-21. 2 channels. Standby loss only 0.4 watts. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. This electricity meter data gateway can make the data from an electronic household meter (eHZ-EDL) with an IR interface in accordance with IEC 62056-21 and SML protocol version 1 available to the RS485 bus. Either for forwarding to an external computer or the GFVS software. Regular flashing of the green LED indicates that the FSDG14 is receiving data from the meter. The active power, up to 4 meter readings and the serial number are transmitted. The serial number corresponds to the last 4 bytes (hex) of the server ID printed on the meter. The radio antenna module FAM14 transmits to the wireless building. Reference data is sent on channel 1 and delivery data on channel 2. To do this, it is necessary for the FAM14 to assign a device address, as described in the operating instructions. If the active power or a meter reading changes, the relevant telegram is sent immediately and all telegrams including the serial number are sent cyclically every 10 minutes. Display also with FEA65D. The FSDG14 can be read out with the PC tool PCT14.
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Other bus systems other
Radio bidirectional yes
Execution Radio interface manufacturer-specific
Mounting REG
Width in division units 1
Dismantling protection no
With LED display no
Updates available no
Operating voltage 12V
Voltage DC
Input 0.4 W
Protocol other
Depending on the provider no
Visualization no
Web Server no
Wireless interface no
IR interface yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Electricity meter data gateway RS485 bus - Radio interface for bus system FSDG14"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.