Radio socket repeater 1 and 2 level - Repeater for home automation FSRP-230V

Radio socket repeater 1 and 2 level - Repeater for home automation FSRP-230V – Eltako – 30000359 – 4010312314999: Radio socket repeater 1 and 2 level FSRP-230V bus system radio bus, other bus systems without, mounting type other, nominal voltage 230V, protection class (IP) IP20, radio repeater adapter plug 1 and 2 level. 100x55x45mm (dimensions without plug), pure white. Stand-by loss only 0.7 watts. Smart home repeaters. Adapter plug for German protective contact sockets with increased contact protection. This repeater is only necessary if the structural conditions prevent undisturbed reception or the distance between the sensor and the actuator is too great. The 2-level mode is active ex works. In addition to the radio signals from sensors, the radio signals from another 1-level repeater are also processed. A radio signal can therefore be received and amplified a maximum of two times. From production week 31/18: You can switch to 1-level mode by unplugging and plugging in several times. Now only the radio signals from sensors are received and amplified. Radio signals from other repeaters are ignored to reduce the amount of data. Activate 1-level mode: Within 10 seconds, briefly unplug and plug in the adapter plug 3 times every second. Activate 2-level mode: Within 20 seconds, briefly unplug and plug in the adapter plug 5 times every second. Radio repeaters do not need to be taught in. They receive and amplify the radio signals from all radio sensors in their reception area.