KNX motion detector 1.10m pure white - KNX movement sensor 205003

KNX motion detector 1.10m pure white - KNX movement sensor 205003 – Gira – 4010337026914: KNX motion detector 1.10m rws 205003 bus system KNX, other bus systems without, version motion detector, type of installation flush-mounted, material other, material quality other, surface other, surface design glossy, color white, RAL number (similar) 9010, stairwell monitoring, response brightness adjustable , Optimum installation height 1.1m, Max. range to one side 6m, Max Motion detection (guard application) or for room surveillance (detector application). Evaluation of the brightness with active motion detection in guard mode. Switching off the lighting when the brightness threshold is exceeded. Configurable number of movement pulses within a monitoring time in message mode. Motion detection is digital via 2 PIR sectors. Sensitivity of the motion detection can be parameterized separately for the PIR sectors in stages. Integrated brightness sensor for determining the ambient brightness. Adjustment of the sensitivity via an adjuster on the device or with the IR remote control PIR KNX (accessory). Evaluation of the measured brightness using up to three independent brightness limit values. Display of motion detection (permanent or only in the walk test). Up to 5 function blocks that can be configured as required for the ''Watcher'', ''Watcher with switch-off brightness'' or ''Detector'' application. Two output communication objects are available for each function block, via which the switching and control commands are sent to the KNX. Configurable functions: switching, staircase function, dimming value transmitter, scene extension, temperature value transmitter, brightness value transmitter, operating mode switchover, switching with forced position. Function block switching for bus-controlled switching between two function block groups. Changeover of the operating mode (OFF AUTO ON) of the first function block during operation through on-site operation. Demand-oriented blocking of individual function blocks via the KNX. Manual operation of the controlled KNX actuators and consequently deactivation of the PIR automatic is possible. In brightness-independent operation, a function block can determine the time span after a last movement and send it to the KNX via a communication object. This function allows, for example, simple monitoring of people's movements in assisted living or in a retirement home. Functionality of the motion detection can be set in the ''Guardian'' or ''Guardian with switch-off brightness'' application. The device can be used in the applications ''Watchdog'' or ''Watchdog with switch-off brightness'' as a single device, as a main unit or as an extension. Walk test function to help with project planning and setting of the PIR detection area. Integrated room temperature measurement. Disassembly alarm, a 1-bit or 1-byte telegram is triggered when the bus coupler is removed. IR remote control PIR KNX (accessories) for setting functions of the first function block (twilight level, sensitivity of motion detection, motion evaluation and run-on time). Switching the walk test function on and off. Notes : For indoor use only. The motion detector is not suitable for alarm messages in VdS-compliant alarm systems.