KNX motion detector 2.20m standard - KNX movement sensor 204103

KNX motion detector 2.20m standard - KNX movement sensor 204103 – Gira – 4010337027027: KNX motion detector 2.20m standard 204103 bus system KNX, other bus systems without, version motion detector, type of installation flush-mounted, material other, material quality other, surface other, design of the surface glossy, color white, RAL number (similar) 9010, stairwell monitoring, response brightness adjustable , Optimum installation height 2.2m, Max. range to one side 6m, Max Motion detection (guard application) or for room surveillance (detector application). Evaluation of the brightness with active motion detection in guard mode. Switching off the lighting when the brightness threshold is exceeded. Configurable number of movement pulses within a monitoring time in message mode. Motion detection is digital via 2 PIR sectors. Sensitivity of the motion detection can be parameterized separately for the PIR sectors in stages. Integrated brightness sensor for determining the ambient brightness. Adjustment of the sensitivity via an adjuster on the device. Display of motion detection (permanent or only in the walk test). A function block configurable. Function block can be configured for the ''Watcher'', ''Watcher with switch-off brightness'' or ''Detector'' application. Two output communication objects are available to the function block, via which the switching and control commands are sent to the KNX. Configurable functions: switching, staircase function, dimming value transmitter, scene extension, temperature value transmitter, brightness value transmitter, operating mode switchover, switching with forced position. Changeover of the operating mode (OFF AUTO ON) during operation through on-site operation or via communication object through on-site operation on other KNX motion detectors via KNX push button or visualization. In brightness-independent operation, the function block can determine the time span after a last movement and send it to the KNX via a communication object. This function allows, for example, simple monitoring of people's movements in assisted living or in a retirement home. Functionality of the motion detection can be set in the ''Guardian'' or ''Guardian with switch-off brightness'' application. The device can be used in the applications ''Watchdog'' or ''Watchdog with switch-off brightness'' as a single device, as a main unit or as an extension. Walk test function to help with project planning and setting of the PIR detection area. Notes: The motion detector is not suitable for alarm messages in VdS-compliant alarm systems. Also suitable for a mounting height of 1.1 m (reduced detection range).