KNX RF operating top unit 2-f. aluminum - Touch rocker for bus system aluminium 510826

KNX RF operating top unit 2-f. aluminum - Touch rocker for bus system aluminium 510826 – Gira – 4010337091219: KNX RF operating attachment 2-f. Alu 510826, KNX bus system=yes, KNX radio bus system=yes, radio bus system=no, LON bus system=no, Powernet bus system=yes, other bus systems=without, bidirectional radio=yes, with bus coupling=yes, material=plastic, material quality =thermoplastic, surface protection=other, color=aluminum, transparent=no, KNX RF operating attachment 2-fold arrow symbols System 55 color aluminum KNX RF the standardized radio system for retrofitting based on 230 V. Features: KNX RF operating attachment for controlling System 3000 inserts as well as remote ones KNX devices using KNX RF. Rocker or button function adjustable for each control surface. Control of up to four functions possible via the button function of the KNX RF operating attachment. KNX RF actuator in conjunction with the System 3000 inserts. Operation on switching, dimming, blind or room temperature controller insert as well as 3-wire extension insert of the System 3000. Integrated temperature sensor. Integrated repeater mode. Room temperature measurement: The RF operating attachment has an internal temperature sensor, which makes it possible to measure and forward the local room temperature. Temperature measurements are only possible in combination with the following inserts: Order no. 5403 00, order no. 5405 00, order no. 5406 00, order no. 5414 00, order no. 5415 00, order no. 5395 00, order no. 5409 00. Operating functions depend on the flush-mounted insert used: The RF operating top unit can be operated with the System 3000 3-wire extension as a 230 V supplied KNX RF operating device. Operating concept: button or rocker function can be parameterized. Switching, dimming and color temperature, color control and brightness, blinds, value transmitter, scene extension, 2-channel operation and controller extension. Switching: The command when pressing and/or releasing is adjustable (no reaction, switching on, switching off, switching). Dimming and color temperature: Brightness and/or color temperature, the command when pressed, the time between switching and dimming, dimming in different stages, the telegram repetition after a long press and the sending of a stop telegram at the end of the press can be adjusted. Color control and brightness: Color circle cycle or brightness adjustment, the command when pressed, the time between switching and dimming, the starting value, the step size and the time between two telegrams can be adjusted. Blind: The command when pressed and the operating concept can be adjusted. The operating concept can be adjusted for short and long actuation and slat adjustment times. Value transmitter: The functionality (1 byte, 2 byte, 3 byte or 6 byte value transmitter) and the value can be set. Scene extension: The functionality (without or with memory function) and the scene number can be set. 2-channel operation: By pressing a button, up to two telegrams can be sent to the KNX. The operating concept can be adjusted and the time for short and long operation can be adjusted. The functionality of the channels can be set separately from each other. Controller extension: The functionality (operating mode switching, forced operating mode switching, presence function and setpoint shift) is adjustable. Locking function for locking individual buttons or rockers. Controller extension properties: The controller extension can be parameterized as a function of a rocker or button. Control of a room temperature controller (operating modes, presence function and setpoint shift). Evaluation of the controller status via the status LED. Temperature measurement can be activated. Measuring the room temperature with an internal sensor or optionally by generating a measured value of the internally measured temperature with an external temperature. Functions of the status LED: The function selection is made for each status LED. The following functions can be parameterized: always OFF, always ON, actuation display, telegram acknowledgment, status display, control via separate LED object, operating mode display, controller status display, presence status display, setpoint shift display. Color can be parameterized. The color selection is done either together for all status LEDs or separately for each status LED of the device. The status LEDs can either light up red, green or blue. The brightness of the status LED can be adjusted in six levels. With night reduction, the brightness of the status LED can be reduced at night via a communication object. Switch actuator functions: The RF operating top unit can be operated with System 3000 switching inserts. Switch actuator channel 1x 2x. Temperature recording possible with order no. 5403 00 and order no. 5405 00. Function selection of the insert for switching: normally open/closed operation, staircase function, scene function (16 scenes), locking function, time delays. Extension input possible as an additional control point for System 3000 use or for radio control of other KNX devices as a sensor. Dimming actuator and DALI actuator functions: The RF operating top unit can be operated with System 3000 dimming inserts. Temperature recording with order no. 5406 00. Function selection of the insert for dimming: dimming principle adjustable for dimming inserts, staircase function, scene function (16 scenes), locking function, time delays. Extension input possible as an additional control point for System 3000 use or for radio control of other KNX devices as a sensor. Blind actuator functions: The RF operating attachment can be operated with System 3000 blind inserts. Blind actuator channel 1-fold. Temperature detection possible. Function selection of the insert for blind control: blind type selectable, safety function (wind, rain, frost alarm), sun protection function, scene function (16 scenes), lock function. Heating actuator functions: The RF operating top unit can be operated with System 3000 room temperature controller inserts. Heating actuator channel 1-gang with order no. 5403 00, order no. 5405 00, order no. 5395 00. Function selection of the insert for room temperature controller: Control of 230 V actuators, heating, cooling mode, heating and cooling mode, PWM and 2-point controller, absolute and relative setpoint specification, heat demand control including cascading, valve protection function, scene function (16 scenes). Extension input is used to switch between heating and cooling mode. Alternatively, the extension input can be used as an additional control point for System 3000 use or for radio control of other KNX devices as a sensor. Notes: KNX Data Secure compatible. Fast download of the application (long frame support). Firmware updates are possible with the Gira ETS service app (additional software). Using a metal cover frame may result in a loss of range. When using Gira TX_44, use adapter frame IP20 and cover from System 55. The rockers can optionally be exchanged for alternative variants.