KNX switching actuator 2-fold or blind actuator 1-fold, including 2 binary inputs TYB692F

KNX switching actuator 2-fold or blind actuator 1-fold, including 2 binary inputs TYB692F – Hager – 3250616059399: Switching/blind output KNX,2/1f,2input UP,6A TYB692F bus system KNX, other bus systems without, mounting type flush-mounted, width in modular units 0, on-site/manual operation, with LED display, number of binary inputs 2, max. switching capacity 1200W, output power 500W, max. number of switching outputs 2, max. switching current 6A, rated current 6A, rated operating voltage 230 ... 230V, with bus coupling, min /1-fold + 2 inputs, UP, 6A. Flush-mounted switch actuator with integrated bus coupler for switching 2 socket outlets or lighting outputs or 1 roller shutter/blind. In addition, 2 binary inputs are available. For the lighting outputs, you can choose between ON/OFF, time switch, safety off, priority control, blocking logic, preset delay function or 64 scenes. With switching function for time or permanent function. The movement command UP/DOWN/Stop and the slat angle can be adjusted via the blind function. Percent control of the blind to move to a predefined position. The sun protection function can be used in conjunction with an outdoor sensor to control the brightness in each room. With alarm function to control the blinds in a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block for controlling the output depending on the result of a logical operation. Preset locking function, forced control. With 2 independent binary inputs for potential-free contacts, binary input functions: toggle (toogle), switching, time switch, shutters/blinds, dimming, heating, priority control, scene, alarm, automatic deactivation, load shedding and window contact. The device converts the bus information into corresponding commands. The outputs are switched via the system line from the inputs assigned to them or from the integrated inputs. Manual operation, as well as a switching status display using an LED and an operating hours counter for each output. The device can be read with a diagnostic tool. With programming button and red programming LED, bus connection and binary inputs assembled with cable and bus terminal or insulated.