KNX outdoor motion detector ARGUS, 220 degrees, mounting height 2.5m, aluminum 632569

KNX outdoor motion detector ARGUS, 220 degrees, mounting height 2.5m, aluminum 632569 – Merten – 4042811083106: KNX ARGUS 220 alu 632569 KNX bus system, other bus systems without, motion detector version, surface-mounted type of installation, material plastic, other material quality, surface painted, surface finish matt, color aluminium, with bus coupling, creep protection/rear field monitoring, stairwell monitoring, response brightness adjustable, optimum installation height 2 5m, max. range to one side 12m, max. frontal range 16m, detection field diameter on the floor 24m, horizontal detection angle 0 ... 220°, number of channels 20, number of binary inputs 0, min. duty cycle 1s, max. Duty cycle 9144min, KNX motion detector for outdoor use. 220 degree area surveillance for larger house fronts and areas of the house. With integrated bus coupler. The physical address is programmed with a magnet. 360 degree close protection zone (approx. 4 m radius). Large connection space and plug-in system. Looping possible. LED function display for quick alignment at the installation site. Controls are protected under the easily accessible cover panel. Flexibly adjustable sensor head. It is possible to hide individual lens areas. Wall and ceiling mounting without additional accessories. Attachment to outside/inside corners and stationary pipes with a mounting bracket. KNX software functions: Five movement blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, locking function. Sensitivity, brightness and staircase lighting time can be set via the ETS or the potentiometer. Learnable staircase lighting timexx detection angle: 220 degrees. Range: max. 16 m. Number of levels: 7. Number of zones: 112 with 448 switching segments. Light sensor: infinitely variable from approx. 3-1000 lux, infinite lux (infinite: motion detection is independent of the ambient brightness). Time: adjustable from outside 1 s to approx. 8 min. in 6 stages or via ETS from approx. 3 s to approx. 152 hours. Sensitivity: continuously adjustable. Wall mount sensor head adjustment: 9 degrees up, 24 degrees down, 12 degrees right/left, +/-12 degrees axial. Sensor Head Adjustment Ceiling Mount: 4 degrees up, 29 degrees down, 25 degrees right/left, +/-8.5 degrees axial. EC directives: Low Voltage Directive 2006/95/EG and EMC Directive 2004/108/EG. Degree of protection: IP 55. Dimensions: 151x93x71 mm (HxWxD). Accessories: mounting bracket 565291/92/93. Programming magnet 639190. Scope of delivery: With cover plate and segments to limit the detection area, screws and dowels. Colour: aluminium.