SpaceLogic KNX Fan Coil 0-10V controller - KNX Heating actuator for bus system MTN6730-0003

SpaceLogic KNX Fan Coil 0-10V controller - KNX Heating actuator for bus system MTN6730-0003 – Schneider Electric – 3606481029904: SpaceLogic KNX Fan Coil 0-10V controller MTN6730-0003 bus system KNX, bus system KNX radio, other bus systems other, mounting type REG, width in division units 4, with bus coupling, bus module removable, control variable switching, valve protection function, max. switching current (resistive load) 16A , Number of outputs 3, Max. output current 16A, switching voltage 250 ... 250V, protection class (IP) IP20, min. depth of the device box 61.5mm, switching actuator 1-gang with three binary inputs for installation in a 60 mm flush-mounted box. Potential-free contacts can be connected to the three inputs. Optionally, an NTC temperature sensor can be connected to the third input. The inputs and the KNX are connected via a 6-wire, approx. 30 cm long connection cable. The connecting cable for the inputs can be extended up to a maximum of 10 m. KNX Secure compatible. KNX software functions: Switch actuator functions: Operation as normally closed or normally closed. Selection of the basic position in the event of bus voltage failure/recovery. Switch-on and/or switch-off delay. Timer function. Switch. Status feedback. Locking function or forced operation. Scene function (64). Feedback object can be inverted. Input functions: Free assignment of the switching, dimming, blind and value transmitter functions. Lock object. Behavior when bus voltage returns. Temperature, brightness, color temperature. Switching: two switching objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single-surface and double-surface operation. Time between dimming and switching and dimming step values. Send telegram repetition and stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), operating concept (Step - Move - Step or Move - Step). Time between short and long presses. Slat adjustment time. Value transmitter and light scene input: edge (button as make contact, button as break contact, switch) and value on edge. Value adjustment via long button press for value transmitter. Light scene extension with memory function. Logic module: link, converter, blocking element, comparator, limit value. Rated voltage: AC 230 V. Rated current: 16 A, ohmic load. Switching contact: NO contact, potential-free relay contact. Rated power: Incandescent lamps: AC 230 V, max. 2500 W. Halogen lamps: AC 230 V, max. 2500 W. HV LED lamps: AC 230 V, max. 400 W. Ohmic load: AC 230 V, 2500 W. Capacitive Load: AC 230 V, 16 A, max.?140 µF. LV halogen lamps: max. 1200 VA wound transformer, max. 1500 W electronic transformers. Inputs: 3.Temperature range: -5 °C to 45 °C.Dimensions: 48x50x28 (WxHxD). LV halogen lamps: max. 1200 VA wound transformer, max. 1500 W electronic transformers. Note: For installation in a double box or an electronics box (Kaiser). There must be a minimum distance of 4mm between the 230V connection and the connection for the KNX/inputs (SELV).